![]() ![]() nas4free install 7 – boot with ip addressįrom here, one can go to the web interface and begin configuring NAS4free. One will see that the OS is installed and booting from the USB stick.Īfter a few more seconds, the console will display the default IP address. Remove the installation media and reboot the system. nas4free install 5 – select USB driveĪfter that screen, click OK and wait for the installer to prompt you to restart. Again, 16GB is too big for this type of application, but it is what we had on hand. Here, you want to use the USB drive which one can see is our SanDisk drive. Now it is time to install to choose the installation media. nas4free install 4 – select installation source nas4free install 3 – embedded partitionsĪs one can see, we are using the virtual CDROM that is part of the KVM over IP solution provided by ASRock for this guide. This install method limits the writes done to the USB stick, and therefore does not wear out the USB sitck’s NAND which tends to be of lower quality. If you do use a USB stick, a tip is to use the Embedded installation. It is recommended that you use a USB drive to install the OS since it does not take up a valuable SATA/ SAS port. Once this is done, one will go to the Install & Upgrade Options Menu. nas4free install 1 – boot from CDĪt this point, you will want to select option 9.to install from the LiveCD. Just select the image once downloaded and let it run. We were able to mount using the ASRock IPMI interface and so there was no burning of a CD, making a bootable USB. The first step is to either download the LiveCD from the NAS4Free site/ sourceforge. The great part is that this server was put together using spare parts in the lab. They are not part of the 20-30TB of disks on the lab’s shelf. The USB drive was significantly too large for this project, but we had it on hand so it was used. Extra NIC: Mellanox ConnectX-2 EN 10GbE single port (more on this later).Cache Drives: Samsung 840 Pro 256GB, OCZ Vertex 4 256GB.RAM: 16GB of Kingston ECC DDR3 UDIMMs (4x 4GB). ![]() Motherboard/ Processor: ASRock C2750D4I with onboard Intel Atom C2750.Test Configurationįor this test we used a low power machine that is a favorite configuration of these types of servers: Today we are going to demonstrate how easy it is to install on a basic system. We actually have used NAS4Free in a number of systems and it is a great project. NAS4Free is one of the easier projects to get started with for novice users. For many contemplating ZFS, the prospect of installing solutions can be a significant barrier to entry. As a derivative of the original FreeNAS codebase, it has significant functionality that is easily accessible even to a novice user. NAS4Free is a project that provides a great web front end for a FreeBSD ZFS based storage server. ![]()
0 Comments
Leave a Reply. |